Operation
Runco CR-26HD/CR-32HDi Owner’s Operating Manual
25
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
To use the on-screen menus:
1.
Press
MENU
to display the Main Menu.
2.
To select a menu item, use the up- or down-arrow buttons (
,
) on the remote
control to highlight it.
3.
Press
ENTER
or the right-arrow button (
) to access that menu.
4.
Use the up- or down-arrow buttons (
,
) to select the setting you want to change.
Then, press
ENTER
or the right-arrow button (
).
5.
Press the right- or left-arrow button (
,
) to change that setting.
6.
To return to the previous menu, press
MENU
.
The Crystal Series LCD Display OSD menus are arranged hierarchically, as shown in
Figure 4-1. Depending on the selected input source and/or signal characteristics, some
menu options may not be available.
1. The maximum available resolution and vertical frequency is
1024x768 at 75Hz or the maximum supported by your video
card, whichever is lower. You can get the best picture at
1024x768/60Hz.
2. The Crystal Series LCD Display supports 24-bit color
(16,777,216 possible colors).
Note
Summary of Contents for Crystal CR-32HDi
