Runco 3Dimension D-73d Ultra, Installation & Operation Manual

Page: 88 / 152

Operation
72 D-73d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Color S aturation: On your external test pattern source, select a color bar pattern like the
one shown in Figure 4-4.
Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint
1. Press the MENU button on the remote control or DHD Controller front panel.
2. Select Service from the Main Menu and press ENTER .
3. Enter the Service menu passcode.
4. Select Display Device from the Service menu and press ENTER .
5. Press ENTER again to select Configure.
6. Select Diagnostics and press ENTER .
7. Select Blue from the Diagnostics menu, then press ENTER to display only the blue
color channel.
8. Press EXIT (or MENU ) repeatedly to return to the Main Menu.
9. Select Picture from the Main Menu and press ENTER .
10.Select Color from the Picture menu and press ENTER .
gray
yellow
cyan
gr
een
magenta
re
d
blue