OSD Menu
· ·
Quick settings:
Long press the LEFT/DOWN/RIGHT button
for 2 seconds to activate the VOLTAGE/PILOT
/TIMER, then you can use the UP, DOWN,
LEFT and RIGHT buttons to move it to the
appropriate location on the screen, and press
the CENTER button to exit.
·
The OSD displays by default the input voltage of
the camera. If the VBAT + cable is connected to
the battery's positive side, it displays the battery
voltage instead.
· ·
Press and hold the RIGHT button for 2 seconds
to select the voltage
· ·
Press and hold the CENTER button for 2 seconds,
the voltage starts to flash, now you can adjust the
Voltage:
· ·
Reduce (LEFT button) or increase (RIGHT button)
0.1V each press. Maximumadjustment range: ± 1v
· ·
After adjustment, press the CENTER button to
select the voltage, then press it again to save and
exit.
16.8v
RunCam
01:08
· ·
Voltage Calibration
Summary of Contents for Night Eagle 2 Pro
Page 1: ...RUNCAM EAGLE2PRO USER MANUAL...
Page 9: ...www runcam com...
