STEP 3
•
Set your phone aside for a minute and
switch to the robot.
•
Be sure the SD card is inserted in the
camera and turn the robot on.
•
Once the camera begins auto recording
(indicated by LED 1 blinking blue), stop the
recording by tapping the power button. The
LED should turn solid blue. If it does not stop
the first time you press the button, wait 5
seconds and press it again.
Power
Button
Summary of Contents for Micro Sparrow 2
Page 1: ...RUNCAM 2 DATE ISSUE INSTRUCTIONS AND SETTINGS...
Page 4: ...STEP 2 OPEN THE APP AND TAP THE DROP DOWN MENU SELECT RUNCAM 2...
Page 6: ...STEP 4 Press the WiFi button and the LED in front of it should start blinking blue WiFi Button...
Page 8: ...STEP 6 Go back to the RunCam app on your phone Tap on connect your camera...
