Rumidimur RecoveRay Sport, Instructions For Use Manual

Page: 5 / 7

9 8
9. Technical specifications
Property Units Description, value Notes
Laser type GaAIAs Solid state laser diode
Maximum power mW 250 Max
Wave length (infrared) nM 808
Pulse frequency kHz 14
Laser pulse duration μs 22
Diode lifespan hours Over 3000
Energy per minute Joul 4.5
Laser beam dimensions (LXH) mm Length 45 x width 10 at opening
Beam divergence degrees ±3
Green control light indicator nM 520 Green light beam signaling device is operating
Timer setting minutes 00:00 to 99:30
Timer intervals seconds 30 Increment or decrement
LCD display dimensions mm 26 x 15 Visible area
Timer display 4 digits (88:88) 1-second intervals
Beep warning yes
Display: Device on, off, operating,
low laser power, errors
Power supply W 3.2 maximum
Automatic shutdown 2 options
automatic shutdown when not in use for
10 minutes; 5 minutes when timer is set to 0
(00:00)
Battery 3 AAA rechargeable batteries (NiMH)
Batteries lifespan hours over 2 with fully charged batteries
Battery charging time hours 5-7 with discharged batteries
Batteries charging current mA 300 minimum
Power supply VAC 100 to 240
AC/DC charging adapter 115/230 VAC, 65/50
Hz Supply 9 V, 500 mA
Property Units Description, value Notes
Dimensions mm 200 x 70 x 40
Charger output voltage VDC 9
Weight grams 175
Operating conditions C°, %
temp. 0° to 40°,
humidity 15% to 90%
without condensation
Storage conditions C°, %
temp. -20° to 55°,
humidity 10% to 95%
without condensation
10. Device maintenance
1. Clean the pressure switch area, No. 5, using a 70% alcohol solution. Clean between sessions if needed and before
handing it to another person’s usage.
2. Be sure to keep the pressure switch area down while cleaning, to prevent wetting the lens.
3. Keep the device in proper storage and work conditions as specified in the technical specification table, do not
leave the device in the car in hot weather.
11. Warranty
The warranty is for 12 months according to company policy, as is detailed on warranty certificate. If batteries
and/or a charger are supplied with the device, they are not included in the warranty. The manufacturer/
distributor is responsible for performance, safety and reliability of the equipment only on condition that all
repairs are carried out exclusively by Company - authorized personnel.
Consult accompanying documents Temperature limitation Humidity limitation
Electrical and electronic equipment CE marking of conformity
Caution, consult
accompanying documents
Type BF IP22 – International Protection Manufacturer
Recycling Authorized representative in the European community
3 x 1.2V AAA Rechargeable batteries | 9V, 300 mA (For charging via AC/ DC adaptor)