background image

Troubleshooting

English  29

Interruption of Electrical 

Service

  If you experience an interruption of electrical service, due to a power surge or other factors, during 

  normal operation of your Rumble Tuff 

®

 Electric Breast Pump, try the following:

  ● Unplug the AC/DC Adapter cord from the electrical outlet and wait for five seconds.

  ● Plug the AC/DC Adapter cord back into the electrical outlet.

  ● If problem persists, try a different electrical outlet.

Radio Frequency Energy

  This equipment generates, uses, and can radiate radio frequency energy. If not installed properly and  

  used in accordance with the instructions; it may cause harmful interference with other devices in the 

  vicinity. Try the following:

  ● Reorient or relocate the device receiving interference.

  ● Increase the distance between the equipment.

  ● Connect the equipment into an outlet on a different circuit from that which the other      

      device(s) are connected.

  ● Consult the manufacturer or a field service technician of the device receiving interference 

      for help.

  ● 

There is no guarantee that interference will not occur.  

Decreased Suction

  If it feels like the suction has decreased, try the following:

  ● Make sure the Breast Pump is assembled correctly 

     (see Assembly Instructions pages 8-13).

    ○ Inspect the One-Way Valve for any tears or pinholes. This component is critical to   

       achieving proper suction. If damaged, replace the One-Way Valve with one of the spare  

       valves that is provided with your Rumble Tuff

 

®

 Electric Breast Pump.

  ● Detach the Tubing and Tubing Adapter from the back of your Electric Breast Pump and place a finger 

      over the Tubing Adapter Inlet. 

    ○ If you do feel suction, the Electric Pump Base is operating properly. 

    ○ If you do NOT feel suction or feel that the suction has decreased to an unexpected strength; contact    

       Rumble Tuff Customer Service for warranty service (see Page 32).

Summary of Contents for Mighty Tyke






































Reviews: