RUMBLE HOG RH7500, Operation Manual

Page: 118 / 164

118
Section 4 - lubrication & maintenance
4.6 replace cutting teeth
Cutting teeth gradually wear during operations
and will need to be replaced when they are worn
out. Service life for the teeth will vary, depending
on the type of pavement and pavement condition.
Before performing any maintenance procedure,
make sure the cutting system is shutdown with
the park brake set and the truck in the service
position.
To replace the cutting teeth:
1. Make sure the truck is stopped with the park
brake set and the truck in the service position.
2. Remove the protector from the socket head
screw.
3. Remove the 3/8” socket head cap screw.
Cutting Drum With Teeth Installed
3/8” Socket Head Cap Screw