·
4.7 Connecting the System Ground
A good grounding system protects your switch against lightning strikes and interferences and ensures its normal operation and
reliability.
Precautions
The sectional area of the grounding wire should be determined according to the possible maximum current. Cables of good
conductor should be used.
Do not use bare wire.
The grounding resistance for combined grounding should be less t
han 1Ω.
Connecting the System Ground
To connect the system ground, follow these steps:
1)
Remove the two screws on the rear of the switch.
2)
Attach the one end of the grounding wire to the switch with the two screws. Connect the other end of the grounding wire to the
grounding wire of the cabinet.
Figure 4-22 Grounding Point on the Rear of the RG-S8605E Switch
Summary of Contents for RG-S8600E Series
Page 1: ...RG S8600E Series Switches Quick Installation Guide V1 02...
Page 5: ...Figure 2 3 Moving the RG S8610E Switch Figure 2 4 Moving the RG S8612E Switch...
Page 7: ...Figure 3 2 ESD Prevention on RG S8607E Figure 3 3 ESD Prevention on RG S8610E...
