Hardware Installation and Reference Guide
Product Overview
Back Panel
Figure 1-6 Back Panel of RG-S1920-24GT4SFP/2GT
Note
1.
Grounding pole
2.
Vent
3.
Power cord retention clip
4.
AC power port
Heat Dissipation
The RG-S1920-24GT4SFP/2GT adopts natural heat dissipation, thereby ensuring normal function of the device in the
specified environment. 10 cm distance space should be reserved at both sides and the back plane of the cabinet to allow
air circulation. It is recommended to clean the device once every 3 months to avoid dust from blocking vents.
LEDs
LED
Panel Identification
State
Meaning
Off
The switch is not receiving power.
Blinking green
The system is being initialized.
Continuous blinking indicates errors.
System status LED
Status
Solid green
The switch is operational.
Off
The port is not connected.
Solid green
The port is connected at 10/100/1000 Mbps.
1000Mbps RJ-45 port
status LED
1-26
Blinking green
The port is receiving or transmitting traffic at
10/100/1000 Mbps.
Off
The port is not connected.
Solid green
The port is connected at 100/1000 Mbps.
1000Mbps SFP port
status LED
25F-28F
Blinking green
The port is receiving or transmitting traffic at
100/1000 Mbps.
