Ruijie RG-AP730-L Series, Hardware Installation And Reference Manual, Page: 13 / 26

·

Disconnect the device before cleaning it.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the AP is working.

Fasten the device tightly.
3.4 Installing the Access Point

Ceiling Mount
1. Drill four 6 mm diameter holes (53 mm apart) on the ceiling. Tap wall anchors into the holes, and drive screws
through the mounting bracket into the anchors to fix the bracket. See Figure 3-1.
Figure 3-1 Attaching the Mounting Bracket on the Ceiling
2. Align the square feet on the rear of the AP over the mounting holes on the bracket. See Figure 3-2.
Figure 3-2 Aligning the Square Feet with the Mounting Holes
Before mounting the AP on the bracket, you must first install the Ethernet cables.