The AP can be installed in any of four directions on the mounting bracket depending on how you route your Ethernet
cables.
The square feet should fit easily into the mounting slots. Do not forcibly push the AP into place.
After installation, verify that the AP is securely fastened.
Wall Mount
4. Drill four 6 mm diameter holes (53 mm apart) on the wall with the arrow on the mounting bracket facing up. Tap wall
anchors into the holes, and drive screws through the mounting bracket into the anchors to fix the bracket.
Figure 4-4 Attaching the Mounting Bracket on the Wall
5.
Align the square feet on the bottom of the AP with the mounting holes on the bracket.
Figure 4-5 Aligning the Square Feet with the Mounting Holes
