Hardware Manual
Chapter 1 Product Overview
1-17
Identification
Description
Detailed Information
S5750P-48GT/
4SFP)
supply full 15.4 W power supply for the PD with 24
external ports and the RPS1100-A for the PD with
48 ports.
Warning
Currently the redundancy power port can be used with our RPS. Other power
products not specified cannot be used as its input source. Failing to do so
may cause faults of or damage to this product. The S5750P-24GT/12SFP
currently does not provide the redundancy power port.
1.4
RG-S5750 10G Expansion Module
The RG-S5750-24GT/12SFP 10G extended port currently supports three types of
conversion boards:
n
M5700--01XFP: 1-port XFP interface 10G conversion board. Each conversion board
provides one extended 10G XENPAK port on the S5750, which supports up to
M5700-01XENPAK conversion boards. The M5700-01XFP conversion board does not
support hot plugging/unplugging, so please install or remove it after the switch is
powered off.
n
M5700-01XENPAK: 1-port XENPAK interface 10G conversion board. Each conversion
provides an expanded 10G XENPAK port on the S5750. The S5750 supports up to
M5700-01XENPAK conversion boards. The M5700-01XENPAK conversion board does
not support hot plugging, so please install or remove it after the switch is powered off.
n
M5700-STACK: one-port 10G stack module, used with our CAB-STACK-CX4/50CM
cable or CAB-STACK-CX4/1M cable, to provide the stack function for the S5750 series
switch.
The following diagrams show the appearances of these three conversion boards. Please
note that the conversion board you buy does not include the optical transceiver module
shown in the diagram, which should be ordered separately.
Figure 1-6
M5700-01XFP 10G Conversion Board
Summary of Contents for M5750-24GT/12SFP
