锐捷以太网交换机快速安装指南
Ruijie Ethernet Switch Installation
Quick Start
设备安装
Install the switch
安装前准备
Preparing for installation
安装到桌面：防静电手套（或手环）
Mounting on the desktop: ESD bracelet or gloves
安装到
19
英寸标准机架：防静电手套（或手环）、螺丝刀、螺钉
Mounting to a standard 19-inch rack: ESD bracelet or gloves, screwdriver, screws
安装到桌面
Mounting on the desktop
将脚垫粘贴在机壳底面四角对应的凹槽中，然后将交换机正面朝上放置于足够大且干净平稳
的桌面上。
Paste the footpad stickers to the corresponding four recesses on the bottom of the switch.
Then turn it upside down and place it on a big enough, clean, stable and flat desktop.
安装到
19
英寸标准机架
Mounting to a standard 19-inch rack
1.
检查机架的接地与平稳性。
Ensure that the rack is stable and level, and is properly grounded.
