Hardware Installation and Reference Guide Installing the Access Point
13
3
Installing the Access Point
The RG-AP820-L(V3) AP must be fixed and installed indoors.
Caution
Before installing the device, make sure you have carefully read the requirements described in Chapter 2.
3.1
Installation Flowchart
3.2
Before You Begin
Before you install the device, verify that all the parts in the package contents are there and make sure that:
The installation position provides sufficient space for heat dissipation.
The installation position meets the temperature and humidity requirements of the device.
The power supply and required current are available in the installation position.
The Ethernet cable have been deployed in the installation position.
The selected power supply modules meet the system power requirements.
Start
Preparation before installation
Check installation precautions
Install the device
Connect cables or fibers
Bundle cables or fibers
Check after installation
End
Install other modules
