·
Slide the AP along the mounting bracket into mounting holes until it is locked into place. Do not forcibly push
the AP into the holes.
After installation, verify that the AP is securely fastened.
Wall-mounted mode
The mounting kit and M8x60 expansion anchors delivered with the AP are required. The installation steps are as follows:
1) Attach the installation kit to the wall and mark the screw location.
Figure 3-4 Installing Wall Bracket
2) Install the AP with the bracket assembly to the wall bracket that has been fixed on the wall and fasten the AP using
the M8x40 screws delivered with the AP. See Figure 3-5.
Figure 3-5 Wall-mounted Mode