27
27
Installation Steps
Installing and Removing the Base
Installation:
1. Take the RG-Rain400 Series out of the
package and put it on the desk horizontally.
2. Align the screw holes on the base with the
screw holes on the RG-Rain400 Series bracket,
and tighten the M4 screws clockwise with a
Phillips screwdriver, as shown in Figure 3.
Figure 3 Installing the Base
Removal:
1. Put the RG-Rain400 on the desk horizontally.
2. Loosen the screws anti-clockwise to remove
the base, as shown in Figure 4.
Figure 4 Removing the Base
