.
1.
Routing mode settings:
step up
next step
←
Mode Switch
Broadband Dynamic Static
Number Acquisition Settings
Equipment Connection
Available WLAN List
B-LINKAD7134
Connected(
good network quality
)
Xiaomi8E64
Saved,Encryption
(
good network
quality
)
TPLINK_2E2A
Saved,Encryption(Internet
access)
If using ADSL Internet broadband Internet access, please follow the following figure 1, 2, 3, 4, 5 order connection;If you use the broadband network in the community,
please connect in the sequence of 3, 4 and 5 as shown in the figure below, and connect the WAN of the router directly to the broadband network in the community.
ON/OFF
Wi-Fi Name
Wi-Fi Password
Telephone
Telephone line
ADSL MODEM
Speech separator
B-LINK-AD7134
12345678
Save Effective
step up
2.4G Wi-Fi
←
Mode Switch
← WLAN
…
⁞ ⁞ ⁞
B-LINK-AD7134
12345678
Save Effective
step up
2.4G Wi-Fi
←
Mode Switch
Wi-Fi Name
Wi-Fi Password
The router is
rebooting,Expectation
67s
USB X4
Computer operation steps
ADSL
Broad
band
access
LIN IN
LIN OUT
Reset
Telephone line
Telephone line
Ethernet cable
Community broadband access
Ethernet cable
Ethernet cable
Wireless connection
warning
1. In thunderstorm weather, please remove the
power supply and all connections of the
equipment to avoid lightning strike;
2.Keep away from heat and maintain ventilation;
3. In the storage, transportation and operation
environment,
please
pay
attention
to
waterproofing;
4. Use rated power adapter;
5. Place equipment on a level, flat surface.
After connecting, please check whether the indicator light is normal
Indicator
light
Name
normal state
(WPS)wireless
encryption
indicator light
Trigger WPS connection, blink;
Connection successful, stop
flashing;
Wireless
status
indicator
Always bright or flashing
(WAN) WAN
Status
indicator
Port connected, indicator light
On:
There is data transmission,
indicator light flashing
(LAN) LAN
Status
indicator light
Port connected, indicator light
On:
There is data transmission,
indicator light flashing
Power
indicator
Normally on
use ADSL Broadband Internet Access,Please click 1, 2, 4 and 5 to connect in sequence in the picture below;If you use
cell broadband,Please click 3, 4 and 5 below to connect in sequence,To put the WAN Direct access to cell broadband.
