RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
36
Figure 8.4.3
There are three options for frame mode: laser on, laser off and four-corner dotting. After selecting the
mode, press the “Cut Frame” key to start and press the “Stop” key to stop.
8.4.4 Return function
Click the “Return” key to enter the frame cutting setting interface, as shown in the figure below:
Figure 8.4.4
XY return position options are mechanical origin, positioning point, non-return and stop point. Z return
position options are mechanical origin, non-return and stop point. After selecting the return position,
press the “Return” key to perform the return action, and relevant motion status will be displayed at the
bottom of the interface at the same time. Press the “Stop” key to stop the motion.
