LFS-PM-T43 operating manual
21
4)
Auxiliary test
Press the “function” to go to “auxiliary test” page. This used to test the piercing gas and the
cutting gas.
5)
Laser emission test
In the operating panel of the motion controller, press “pulse” to test the laser.
6)
Reference position
Move the laser head to a referenced position. Press “reference” and the current position is set
to be the zero position.
7)
Frame
After set the referenced poison, press “Frame” to execute a frame motion.
8)
Start cutting
Press “start” to start a normal cutting
。
