Tumbler MPR 300
20
Foundation load:
5,8 kN/m²
Emission sound pressure level: L
pA
≤ 70 dB(A)
Measured according to:
DIN EN ISO 11204, accuracy class 2
according to DIN EN ISO 3744
Measured when:
while idling without product, at maxi-
mum speed
The data on the type plate principally applies; it is located at the rear
of the machine next to the power supply line. In case of deviations,
please contact the manufacturer for a written confirmation of the
data!
If your country requires an RCD as protective measure, an RCD (type
B), AC/DC sensitive, must be used.
7.2
Electrical circuit diagram
The electrical circuit diagram of your machine is located in the electri-
cal control cabinet and must be supplied when reselling the machine!
