Tumbler MPR 150 / 220
18
5.3
Repair and spare parts
As a damaged part on a machine is usually damaged due to causes
unrelated to the part, always carry out a fault diagnosis.
For this reason, contact our Service Hotline at +49 7748-523-11 for
spare parts or technical faults. Please keep the machine type and
number ready.
6
Disposal
All materials and operating fuels must be separated and
disposed of in accordance with nationally applicable regu-
lations!
1.
The machine contains a cooling system filled with the refrig-
erant R404A. It must be pumped off by a refrigeration in-
staller and must then disposed of correctly!
2.
The following components contain oil:
a.
Lid drive
b.
Tumbling arm drive
c.
Mixing arm drive
d.
Slewing gear
e.
Vacuum pump
f.
Compressor (cooling unit)
All gears/motors except for the compressor are equipped with
oil draining screws. The compressor must be drilled open for
draining the oil.
7
Technical documentation
7.1
Technical data
Connection voltage:
400 V
50/60 Hz 3-phase AC / N / PE
Power consumption:
4.2 kW
Full-load current:
10.7 A
Back-up fuse max.:
16 A
