RuggedCom RuggedSwitch RSG2300, Installation Manual

Page: 34 / 52

Chapter 4
Communication Ports
RUGGEDCOM RSG2300
Installation Guide
24 SFP Transceivers
2 1
Figure 19: SC Port
1. Tx Connector 2. Rx Connector
2 1
Figure 20: ST Port
1. Tx Connector 2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to Section 5.5, “Fiber Optic Ethernet Port
Specifications” .
Section 4.3
SFP Transceivers
The RUGGEDCOM RSG2300 features two Small Form-Factor Pluggable (SFP) transceiver sockets, which are
compatible with a wide array of SFP transceivers available from Siemens.
The following SFP transceivers are compatible with the RUGGEDCOM RSG2300. For more information, including
installation/removal instructions and ordering information, refer to the RUGGEDCOM SFP Transceiver Catalog
[https://support.industry.siemens.com/cs/ww/en/view/109482309] .
IMPORTANT!
Only use SFP transceivers approved by Siemens for RUGGEDCOM products. Siemens accepts no liability
as a result of performance issues related in whole or in part to third-party components.
SFP Transceiver Order Code
Speed
(Mbit/s)
Mode
a
Nominal Distance (km)
RUGGEDCOM SFP1112-1 6GK6000-8CG01-0AA0 10/100/1000
b
CAT-5e
Copper
0.1
RUGGEDCOM SFP1121-1FX2 6GK6000-8FE51-0AA0 100 MM 2
RUGGEDCOM SFP1131-1FX20 6GK6000-8FE52-0AA0 100 SM 20
RUGGEDCOM SFP1131-1FX50 6GK6000-8FE53-0AA0 100 SM 50
RUGGEDCOM SFP1131-1FX90 6GK6000-8FE54-0AA0 100 SM 90
RUGGEDCOM SFP1132-1BX10R 6GK6000-8FB51-0AA0 1000 SM 10
RUGGEDCOM SFP1132-1BX10T 6GK6000-8FB52-0AA0 1000 SM 10
RUGGEDCOM SFP1132-1BX40R 6GK6000-8FB53-0AA0 1000 SM 40
RUGGEDCOM SFP1132-1BX40T 6GK6000-8FB54-0AA0 1000 SM 40
RUGGEDCOM SFP1122-1SX 6GK6000-8FG51-0AA0 1000 MM 0.5
RUGGEDCOM SFP1122-1SX2 6GK6000-8FE58-0AA0 1000 MM 2
RUGGEDCOM SFP1132-1LX10 6GK6000-8FG52-0AA0 1000 SM 10
RUGGEDCOM SFP1132-1LX25 6GK6000-8FG53-0AA0 1000 SM 25
RUGGEDCOM SFP1132-1LX40 6GK6000-8FG57-0AA0 1000 SM 40