RUGGEDCOM RSG2488
User Guide
Chapter 3
Device Management
Managing Remote Monitoring
79
3. Click
Apply
.
Section 3.11
Managing Remote Monitoring
Remote Monitoring (RMON) is used to collect and view historical statistics related to the performance and
operation of Ethernet ports. It can also record a log entry and/or generate and SNMP trap when the rate of
occurence of a specified event is exceeded.
The following sections describe how to configure and manage Remote Monitoring:
•
Section 3.11.1, “Managing RMON History Controls”
•
Section 3.11.2, “Managing RMON Alarms”
•
Section 3.11.3, “Managing RMON Events”
Section 3.11.1
Managing RMON History Controls
The history controls for Remote Montoring take samples of the RMON-MIB history statistics of an Ethernet port at
regular intervals.
The following sections describe how to configure and manage RMON history controls:
•
Section 3.11.1.1, “Viewing a List of RMON History Controls”
•
Section 3.11.1.2, “Adding an RMON History Control”
•
Section 3.11.1.3, “Deleting an RMON History Control”
Section 3.11.1.1
Viewing a List of RMON History Controls
To view a list of RMON history controls, navigate to
Ethernet Stats > Configure RMON History Controls
. The
RMON History Controls
table appears.
Figure 44: RMON History Controls Table
If history controls have not been configured, add controls as needed. For more information, refer to
Section 3.11.1.2, “Adding an RMON History Control”
.
