manualshive.com logo in svg

RuggedCom RSG2488, User Manual

The RuggedCom RSG2488 User Manual is an essential resource for anyone looking to maximize their experience with this exceptional product. Easily download this comprehensive manual for free from our website, allowing you to fully understand and optimize the features of the RuggedCom RSG2488.

Share
Download
background image

RUGGEDCOM RSG2488

User Guide

Chapter 5

Setup and Configuration

Managing MAC Addresses

155

Parameter

Description

Class of Service assigned to received frames with the specified DSCP.

4. Click 

Apply

.

Section 5.4

Managing MAC Addresses

The following sections describe how to configure and manage MAC addresses:
•

Section 5.4.1, “Viewing a List of MAC Addresses”

•

Section 5.4.2, “Configuring MAC Address Learning Options”

•

Section 5.4.3, “Managing Static MAC Addresses”

•

Section 5.4.4, “Purging All Dynamic MAC Addresses”

Section 5.4.1

Viewing a List of MAC Addresses

To view a list of all static and dynamically learned MAC addresses, navigate to 

MAC Address Tables > View MAC

Addresses

. The 

MAC Addresses

 form appears.

Figure 108: Static MAC Address Table

If a MAC address is not listed, do the following:
• Configure the MAC address learning options to dynamically detect the MAC addresses of other devices on the

network. For more information, refer to 

Section 5.4.2, “Configuring MAC Address Learning Options”

.

• Configure the address on the device as a static MAC address. For more information, refer to 

Section 5.4.3.2,

“Adding a Static MAC Address”

.

Section 5.4.2

Configuring MAC Address Learning Options

The MAC address learning options control how and when MAC addresses are removed automatically from the

MAC address table. Individual adresses are removed when the aging timer is exceeded. Addresses can also be

removed when a link failure or topology change occurs.
To configure the MAC address learning options, do the following:

Summary of Contents for RSG2488



































































































































































































Reviews:

No comments

Related manuals for RSG2488

DANLERS CESF PIR Installation Notes preview
CESF PIR
Brand: DANLERS Pages: 2
J-Tech Digital JTECH-HD4X48 User Manual preview
JTECH-HD4X48
Brand: J-Tech Digital Pages: 28
Generac Power Systems 004635-3 Owner'S Manual preview
004635-3
Brand: Generac Power Systems Pages: 20
Silent Gliss 0913 Installation, Programming And Operation Instructions preview
0913
Brand: Silent Gliss Pages: 4
3onedata ES1026-2F Quick Installation Manual preview
ES1026-2F
Brand: 3onedata Pages: 2
Eaton HOMECT Installation And Setup Manual preview
HOMECT
Brand: Eaton Pages: 5
Lantech IES-5216DF User Manual preview
IES-5216DF
Brand: Lantech Pages: 30
Cable Electronics HSW44C Plus Instruction Manual preview
HSW44C Plus
Brand: Cable Electronics Pages: 16
Wetekom 83 52 59 Original Instruction Manual preview
83 52 59
Brand: Wetekom Pages: 34
ADDER ADDERView Secure AVS-4128 User Manual preview
ADDERView Secure AVS-4128
Brand: ADDER Pages: 24
Hall Research Technologies Genesis Digital HSM-04-02 User Manual preview
Genesis Digital HSM-04-02
Brand: Hall Research Technologies Pages: 28
DANLERS ControlZAPP CZ CEFL 10VDC Installation Notes preview
ControlZAPP CZ CEFL 10VDC
Brand: DANLERS Pages: 2
Allied Telesis AT-GS903SX Installation Manual preview
AT-GS903SX
Brand: Allied Telesis Pages: 44
QNAP QSW-M2108 Series Quick Installation Manual preview
QSW-M2108 Series
Brand: QNAP Pages: 28
Extron electronics CrossPoint 42 HVA User Manual preview
CrossPoint 42 HVA
Brand: Extron electronics Pages: 46
Kramer VP-553xl User Manual preview
VP-553xl
Brand: Kramer Pages: 85
Novus NVS-3208SP-EH User Manual preview
NVS-3208SP-EH
Brand: Novus Pages: 16
VigilLink VLWP-UHU-TR User Manual preview
VLWP-UHU-TR
Brand: VigilLink Pages: 9

Brands by name

Popular brands

Load more brands