20
1. Scan (SCAN---MENU 1)
Functions:
under VFO/MR/CH mode, the transceiver allows you to scan the entire current
operating band and memory channels.
Enter MENU 1 and press [ ] key to start scanning.
When you start scanning, press [ ] /[ ] key to change direction. And it will halt on a
signal it encounters, press [ ] key to stop scanning.
Scanning operation is basically the same in each of the above modes. Before you begin, take a
moment to select the way in which you would like the scanner to halt on a signal.
2. Squelch Adjustment (SQUELCH---MENU 2)
Functions:
Squelch system allows you to mute the background noise when no signal is
being received. Not only does the Squelch system “standby” operation more pleasant, it also
significantly reduce battery current consumption.
Enter MENU 2 to set SQL level. Default: 3
3. Dual Watch/Standby (MONITOR---MENU 3)
Functions:
This transceiver allows you to receive the sub band signal even if you are working
on the operating band. It could monitor the signal under both master and sub band at the
same time.
Enter MENU 3 to set MONITOR. Default: ON
DETAILED FUNCTION DESCRIPTION
