SelfieCam
Order and Installation Manual:
Installation
SelfieCam –
Section 3 - Installation
© Rugged Interactive
202
1
Required Tools and Consumables:
§
A spirit level – to check floor is level before installation and that the SelfieCam unit is level during
installation.
§
An industrial vacuum cleaner.
§
A dustpan and brush.
§
A SDS impact drill.
§
A cordless drill – with torque adjuster to avoid over-tightening of screws.
§
A set of No.2 pozi bits.
§
A set of screwdrivers.
§
A socket set.
Required Extras:
§
55” HD Screen and TV mount with combined depth no greater than 120mm.
§
The SelfieCam unit must have a wired connection to the Internet.
Suggested Extras:
§
An extension cable in case the power supply is not within 3000 mm of the SelfieCam unit.
§
Cleaning cloth and gentle cleaning spray.
Installation:
§
Please consider the surroundings and what will be in the shot when surveying an area in
preparation for installation.
Installation Height:
§
SelfieCam should be mounted with a minimum height of 500mm from the trampoline bed to the
base of the unit.
§
Take into consideration individual trampoline park primary user groups and the relative bounciness
of trampolines when determining the installation height.
Recommended Trampoline Bed Size:
§
Single trampoline: Frame approx. 2.4 m x 2.4 m (bed approx. 1.9 m x 1.9 m)
§
Only one SelfieCam unit should be installed per trampoline.
Operating Environment:
§
Keep out of direct sunlight; bright sunlight can affect the camera’s visibility.
§
Keep indoors and dry.
§
Optimum ambient temperature: 5°C to 30°C. Avoid extreme fluctuations of temperature.
