CardioWall
Compact
Order and Installation Manual:
Installation
CardioWall
Compact
–
Section 3 - Installation
© Rugged Interactive
2019
Connecting CardioWall Compact Duo
Connecting two CardioWall Compacts will activate the Combat program.
The following instructions assume:
- Both CardioWall Compacts are not attached to the wall.
- A standard CAT5 network cable (3-5 m long) is available.
The CardioWall will need to be tilted forward slightly so the CAT5 network cable can be plugged into the
network cable socket on the back of the CardioWall; bottom left-hand side or rear.
Route the CAT5 cable carefully where you require it, then plug the other end of the CAT5 cable into the
network socket on the back of the second CardioWall; bottom left-hand side or rear.
Check that the walls are connected correctly by checking that the Combat pods (bottom left on both
CardioWalls) are lit red and have become active.
Starting the Combat program.
Hit the “Combat” pod on one of the CardioWall Compact walls. The CardioWall Compact will sound, “Play
the other wall.” Hit the “Combat” pod on the second CardioWall Compact. The program shall begin.
NOTES:
- On a Standard CardioWall Compact, Combat will override CardioBeat.
- On an Ability CardioWall Compact, Combat will override SoundBoard.
- Combat cannot be activated on the Sensory CardioWall Compact.
