This radio generates RF electromagnetic energy during transmission. This radio is
classified as “Occupational Use Only,” meaning it should only be used by those who
are properly trained and aware of potential hazards, and not by general consumers in
an uncontrolled environment. This radio has been tested and complies with FCC RF
exposure limits. In addition, this radio complies with the following guidelines with regard
to RF energy, electromagnetic energy levels and exposure to humans.
RF energy can potentially interfere with other devices. To avoid such interference, turn
off the radio in areas where you are indicated to do so. DO NOT operate the radio in areas
that are sensitive to electromagnetic radiation, such as hospitals, airports, or demolition
sites.
This radio complies with IEEE and ICNIRP exposure limits for occupational RF exposure.
An appropriate warning label is affixed to all units. In order to comply with such limits, a
minimum distance of at least 2.5cm must be maintained. Any body worn usage should be
restricted to approved accessories, such as belt clips. Do not use this device if the
antenna shows obvious damage.
For more information refer to https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
and search FCC ID: POD-DMR3
IEEE Std. 1528:2013 and KDB447498
Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields
Table of Contents
American National Standards Institute (C95.1-1992)
IEEE Standard for Safety Levels
with Respect to Human Exposure Institute to Radio Frequency Electromagnetic Fields,
3 kHz to 300 GHz
American National Standards Institute (C95.3-1992)
IEEE Recommended Practice for
the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave
version 1.0 | 07/2020
version 1.0 | 07/2020
