Rugged Computing ID90, User Manual

Page: 20 / 45

Rugged Computing
Users Manual Rugged Table PCs
20
CHAPTER 2 OPERATING TABLET PC AND HOTTAB HOTKEY UTILITY
This Chapter will guide you how to operate the Tablet PC, including start /
stop the PC, and how to use menu function including basic hardware function
adjustment and the HotTab hotkey utility software that is very easy & helpful
for operating the computer.
2.2 Starting and Stopping the Tablet PC
Starting the Tablet PC
You always start the tablet PC using the power button, push the Power
Button continuously by 4 second to turn on the Tablet PC.
Our Tablet PC will starts up with an operating system (OS) existing on the
storage device like the hard disk. The computer will automatically load the OS
after you turn it on. This is normal booting process.
NOTE: The operating system is the platform for all software application
programs to run on. The Tablet computer is recommended to use the
Microsoft Windows XP embedded operating system for default solution.
Stopping the Tablet PC
When you finish your work, you can stop the tablet PC by turning off the
power or leaving the tablet PC in Standby mode:
# Stop mode How to do Start or
Resume
again
1 Power Off Following the shutdown process during
operating system. The standard
process can prevent unsave data loss or
damage your software programs.
2 Sleep (S3) Under normal operating system, Push
the Power Button 0.5 second to go
to sleeo mode.
If you choose to stop in Standby mode, you can return to where you left off
the next time you start up the tablet PC.
(See “ Power Management ” in
Chapter 3 for more information.)