CD screen shows garbage or bad characters or vertical/horizontal color lines or
L
bars:
•
Detach the video connection to the LCD screen and attach it to a good
external CRT monitor. If the
patibi
external CRT monitor shows normal video
lity issue. Replay the VGA card with a different
you could have a bad conversion board or
u
LCD scre
programs r
•
ent Analog-Digital conversion board (AD board) should
splay.
er supported resolutions. You can also try adjusting the OSD
Keyboard and pointing device not responding:
then it could be a com
one and try again. Alternatively,
loose cables inside the LCD subassembly.
•
If the external CRT monitor shows similar garbage characters then yo
have a bad video card.
en works fine in Windows but acts funny when running certain
o games:
The built in Intellig
adjust the screen to the proper resolution to fill the entire di
However, certain programs or display modes might cause the AD board to
not align or sync properly. Check if the program that you are running is
running und
manually.
Remove both the PS-2 connections on the mother board and try using an
external regular keyboard and mouse. If the external keyboard or pointing
device are working then you have a bad keyboard or keyboard cable
assembly.
•
•
If the external keyboard or pointing device are not working then you
should check to see if you have connected the keyboard and mouse
properly to the motherboard (connected to the right ports).
42
Summary of Contents for ATLAS slim 14
Page 31: ...30 ...
