manualshive.com logo in svg

Ruger RC1000S, Operator'S Manual

Share
Download
Ruger RC1000S Operator'S Manual Download Page 7

1000 lb. Capacity
Ideal for the automotive and truck markets
Boom can be mounted at 5 different
height positions

ACCESSORIES

Barrel Grip
Floor Lock
Steel or Polyurethane Wheels

RC1000S

Prices, Specifications, and Options are subject to Change
Without Notice.

All Ruger products are shipped F.O.B. Solon Ohio 44139
Unit Ships-NMFC  #189240 - Class 85
Shipping Wt.  285 lbs

Maximum Value and Safety.

The RC1000S  boom
reaches 40” out from ram
connecting point and lifts
1000 pounds.

Tested and exceeds
ANSI/ASME     PALD-12C
standards.
Meets ANSI Z.535

STANDARD FEATURES

Meet Ruger’s engineering standards of 150% structural
overload of maximum rated capacity
Completely self-contained hydraulic system with single
action jack
Boom and hydraulics adjust to 5 height locations
Built-in hydraulic overload relief valve
(An original Ruger patent)
Needle type release valve permits pin-point control over
lowering and holding of the heaviest or lightest loads
Snatch hook
Phenolic casters with roller bearing wheels

4

VERSATILE

COMPACT

AFFORDABLE

RELIABLE

David Round & Son, Inc.
Ruger Products Division
32405 Aurora Road
Cleveland, OH 44139
Phone: 440-248-4700
www.rugerequipment.com

FAX: 440-248-8544          E-mail:[email protected]

Summary of Contents for RC1000S





















Reviews:

No comments

Brands by name

Popular brands

Load more brands