manualshive.com logo in svg

Rugby SR-Series, Installation & Operation Manual

Share
Download
Rugby SR-Series Installation & Operation Manual Download Page 3

 

 

 

 

Rugby Manufacturing                      1841488C | 13-Jul-20                                          Page 1 

  

Rugby Manufacturing SR-Series Hoist Manual

 

How to Use This Manual 

 

This manual provides guidelines, and instructions for correctly assembling, operating and 

maintaining your Rugby Manufacturing product. Any and all people that own and operate this prod-
uct must read and fully understand each section in this manual.  

 

Labels 

 

Throughout this manual, the three following types of labels will be used: danger, warning, and 

caution. It is imperative that all labels are obeyed, for the safety of the operator

 

Indicates a hazardous situation which, if not avoided, will result in 
death or serious injury

 

 

 

 

Indicates a hazardous situation which, if not avoided, could result in 
death or serious injury.

 

Indicates a hazardous situation which, if not avoided, could result in 
minor or moderate injury.

 

Reference Information  

 

Serial Number 

 

This information is required for any warranty or service inquiries, and should be recorded on the front 
page of this manual for easy reference.

 

 

Figure 1 

The serial number plate is located on the rear spacer plate of the hoist (

Figure 1

).

 

Summary of Contents for SR-Series





















Reviews:

No comments

Brands by name

Popular brands

Load more brands