Ruffneck Defender XTE-412 Installation Instructions Download Page 4

Oakville

1-800-410-3131
1-905-829-4422
F 905-829-4430

Orillia

1-877-325-3473
1-705-325-3473
F 705-325-2106

WARRANTY

:

 

Under normal use the Company warrants to 

the purchaser that defects in material or workmanship will be 
repaired or replaced without charge for a period of 12 months 
from date of shipment. Any claim for warranty must be reported 
to the sales office where the product was purchased for autho-
rized repair or replacement within the terms of this warranty.

Subject to State or Provincial law to the contrary, the Company 
will not be responsible for any expense for installation, removal 
from service, transportation, or damages of any type whatsoever, 
including damages arising from lack of use, business interruptions, 
or incidental or consequential damages.

The Company cannot anticipate or control the conditions of 
product usage and therefore accepts no responsibility for 
the safe application and suitability of its products when used 
alone or in combination with other products. Tests for the 
safe application and suitability of the products are the sole 
responsibility of the user.

This warranty will be void if, in the judgment of the Company, the 
damage, failure or defect is the result of:

• 

Vibration, radiation, erosion, corrosion, process con  -
tamination, abnormal process conditions, temperature and 
pressures, unusual surges or pulsation, fouling, ordinary 
wear and tear, lack of maintenance, incorrectly applied 
utilities such as voltage, air, gas, water, and others or any 
combination of the aforementioned causes not specifically 
allowed for in the design conditions, or

• 

Any act or omission by the Purchaser, its agents, servants 
or independent contractors which for greater certainty, but 
not so as to limit the generality of the foregoing, includes 
physical, chemical or mechanical abuse, accident, 
improper installation of the product, improper storage 
and handling of the product, improper application or the 
misalignment of parts.

No warranty applies to paint finishes except for manufacturing 
defects apparent within 30 days from the date of installation.

The Company neither assumes nor authorizes any person to assume for it 
any other obligation or liability in connection with the product(s).

The Purchaser agrees that all warranty work required after the initial 
commissioning of the product will be provided only if the Company 
has been paid by the Purchaser in full accordance with the terms and 
conditions of the contract.

The Purchaser agrees that the Company makes no warranty or 
guarantee, express, implied or statutory, (including any warranty of 
merchantability or warranty of fitness for a particular purpose) written 
or oral, of the Article or incidental labour, except as is expressed or 
contained in the agreement herein.

LIABILITY:

 

Technical data contained in the catalog or on the 

website is subject to change without notice. The Company reserves 
the right to make dimensional and other design changes as required. 
The Purchaser acknowledges the Company shall not be obligated 
to modify those articles manufactured before the formulation of the 
changes in design or improvements of the products by the Company.

The Company shall not be liable to compensate or indemnify the 
Purchaser, end user or any other party against any actions, claims, 
liabilities, injury, loss, loss of use, loss of business, damages, indirect 
or consequential damages, demands, penalties, fines, expenses 
(including legal expenses), costs, obligations and causes of action of 
any kind arising wholly or partly from negligence or omission of the 
user or the misuse, incorrect application, unsafe application, incorrect 
storage and handling, incorrect installation, lack of maintenance, 
improper maintenance or improper operation of products furnished 
by the Company.

Edmonton (Head Office)

1-780-466-3178
F 780-468-5904
5918 Roper Road
Alberta, Canada T6B 3E1

Houston

1-855-219-2101
1-281-506-2310
F 281-506-2316

Denver

1-855-244-3128
1-303-979-7339
F 303-979-7350

For further assistance, please call 24hr hotline: 1-800-661-8529 (U.S.A. and Canada)
Please have model and serial numbers available before calling.

Summary of Contents for Defender XTE-412

Page 1: ...rdous atmospheres disconnect equipment from the supply circuits before opening Keep assembly tightly closed when in operation CAUTION CAUTION To reduce the risk of electric shock Do not connect to a circuit operating at more than 150V to ground ISO 9001 Defender XTE 412 Installation Instructions Ruffneck is a registered trademarks of CCI Thermal Technologies Inc Copyright 2017 All rights reserved ...

Page 2: ...rature will be sensed and air circulates freely Keep thermostat away from hot and cold surfaces Step 2 1 Three types of power supply terminals are supplied Installed on the thermostat is a J4 connector wired for 120V See Figure 1 2 A J4 connector is supplied seperately for 240V power supply Simply remove 120V J4 connector and install 240V J4 connector See Figure 2 and 3 Feed thru Models XTE 412 SP...

Page 3: ...Install the cover using the 4 bolts supplied and tighten Step 5 Fill any unused conduit opening using plug supplied Resistive Heating Load 240V 20 A Max Heating Load Cooling Load N C Direct Acting N O Reverse Acting Load Switching Relay Neutral Line 240 VAC Max 50 60 Hz Figure 8 Figure 9 Figure 10 N O Terminal Figure 7 Heating Load Cooling Load N C Direct Acting N O Reverse Acting Cooling Load Hea...

Page 4: ...o warranty applies to paint finishes except for manufacturing defects apparent within 30 days from the date of installation The Company neither assumes nor authorizes any person to assume for it any other obligation or liability in connection with the product s The Purchaser agrees that all warranty work required after the initial commissioning of the product will be provided only if the Company h...

Reviews: