Align each telescope as outlined earlier by sliding along the bar. (Fig. 7)
N.B.
If you are using your Loupes in conjunction with a fibre-optic headlamp, first adjust the
Loupes as described above. The light may then be adjusted to illuminate the specific area you are
viewing through your Loupes.
6. HOW TO FIT AND REMOVE LOUPES FROM A FRAME OR HEADBAND
Riester
loupes allow you to easily fit or remove them from a frame or headband. This allows you to
switch between loupes of different magnifications without having to purchase an additional frame.
To fit
Riester
Loupes to the hinge, hold the Loupe PD bar and push the Loupes onto the hinge pins
through the holes on the PD bar. To remove, hold the loupe P.D bar and hinge and wriggle the
Loupes away from the pins. (Fig. 9)
UNDER NO CIRCUMSTANCES SHOULD THIS BE DONE BY HOLDING THE
TELESCOPES
If your Loupe frames are fitted with prescription lenses, you may find it necessary to position your
Loupes on the front stop of the Loupe pins to prevent the telescope from touching the lenses,
particularly when the curvature of high powered lenses prevent the Loupes from being angled fully
downward.
Fig. 7
Fig. 9
