Cabinet Door Adjustment
By loosening or tightening this
screw you can adjust the doors
nearer to or further away from
the center seam of the door pair.
To properly align the height of
the doors, loosen both hinge
plate screws as indicated then
make the proper adjustment and
re-tighten.
Each credenza hutch door
should have a slight gap
(approximately 1 millimeter)
between the rear of the door and
the front of cabinet. To properly
adjust the gap, loosen the screw
as indicated then make proper
adjustment and re-tighten.
1mm
gap
Cabinet 16 of 16
C
ó
d
.
2
2
6
0
0
8
6
6
-
R
e
v
is
ã
o
1
4
Summary of Contents for CABINET ALP 13
