Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 384 / 410

370
Command Line Interface
RMON Commands
show rmon history
Displays RMON index group history
Command Mode: User EXEC
Syntax
show rmon history [<Index(1-65535)>]
Description
■
[<Index(1-65535)>]
- Specifies the history group index, from 1 to 65535. If no value
entered diplays all RMON history information.
Example
Switch# show rmon history 1
RMON is enabled
Entry 1 is valid and owned by kitty,
Monitors ifIndex.1 every 20 second(s)
Requested # of time intervals, ie buckets, is 20,
Granted # of time intervals, ie buckets, is 20,
Sample 1 Start Interval at 1900/01/01 04:29:41
0 octets, 0 packets,
0 broadcast and 0 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
# of dropped packet events is 0
Network utilization is estimated at 0
Sample 2 Start Interval at 1900/01/01 04:28:06
0 octets, 0 packets,
0 broadcast and 0 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
# of dropped packet events is 0