Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 309 / 410

295
Command Line Interface
Diffserv Commands
diffserv portlist
Enables (creates and configures) or disables (deletes) a diffserv port list. May define up to
1024 port lists for the switch. If more than 1024 port lists are created, a warning will prompt
the user and the new out-profiles will be ignored. Deleting a port list entry bound to any
policy action is not allowed.
Command Mode: Global Configuration
Syntax
[no] diffserv portlist <datapath-id> <1/[2,6-10],3/2>
Description
■
<datapath-id>
- Sets the diffserv port list index ID.
■
<1/[2,6-10],3/2>
- Sets the diffserv port list.
■
no diffserv portlist
- Disables (deletes) a diffserve port list.
Example
!Creates port list Index 5, for ports 3 through 7.
Switch(config)#
diffserv portlist
5 1/[3-7]
Switch(config)#
!Deletes port list 5.
Switch(config)#
no diffserv portlist
5
Switch(config)#