Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 262 / 410

248
Command Line Interface
Multiple Spanning Tree Commands
spanning-tree mst point-to-point
Configures Point-to-Point status on a port.
Command Mode: Interface Configuration
Syntax
spanning-tree mst point-to-point <status>
Description
■
<status>
- Specifies the point-to-point status as forcetrue, forcefalse or auto. Default
is auto.
Status Description
forcetrue Force TRUE (enables P2P status)
forcefalse Force FALSE (disables P2P status)
auto Auto Detection (Default)
Example
!Forces point to point to be false (disabled) on port 4
Switch(config)# interface GigabitEthernet 1/4
Switch(config-if)# spanning-tree mst point-to-point forcefalse
Switch(config-if)#