Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 209 / 410

195
Command Line Interface
SNMP Commands
SNMP-server target-parameters
Specifies the target parameters for SNMP protocols.
Command Mode: Global Configuration
Syntax
[no] SNMP-server target-parameters <ParamName> sec-model { v1 | v2c |
v3 } user-usm <SecurityName> sec-level { noAuthNoPriv | authNoPriv |
authPriv }
Description
■
<ParamName>
-Sets the target parameter name.
■
sec-model { v1 | v2c | v3 }
- Selects the security model.
■
user-usm <SecurityName>
- Specifies the security name.
■
sec-level { noAuthNoPriv | authNoPriv | authPriv }
- Selects the
authentication and privacy settings. noAuthNoPriv disables this feature. authNoPriv
enables message digest (MD5) or Secure Hash Algorithm (SHA) packet authentication.
authPriv enables both authentication and privacy.
■
no SNMP-server target-parameters
- Disables the target parameter.
Example
!Sets SNMP target parameters
Switch(config)# SNMP-server target-parameters default user-usm v3
sec-name hello sec-level noAuthNoPriv
Switch(config)#
!Disables SNMP target parameters
Switch(config)# no SNMP-server target-parameters default
Switch(config)#