Installing the T504
Deploying the T504
T504 Strand Mount Concurrent AP with Integrated CM Installation Guide, 800-70610-001 Rev A
28
5
In the address or location bar, type the CM IP address, for instance:
192.168.100.1
--OR--
<DHCP-assigned CM IP address>
The cable modem web interface displays a login prompt.
6
Leave
User Name
blank.
7
In
Password,
type
ADMIN
.
8
Click
Log In
. The
Connection Status
page appears, indicating that you have
successfully logged on to the cable modem web interface.
.
Logging Into the CM Web Interface using a Dynamic IP Address
1
Collect required equipment and information:
•
An administrative computer as configured as described in
.
•
The IP address assigned to the cable modem by the DHCP server at the
CMTS.
2
Use a 7/16” (11mm) wrench to remove the reset button and diagnostic Ethernet
port screw-in plug (see
3
Connect the administrative computer to the same subnet as the T504.
4
On the administrative computer, start a Web browser.
5
In the address bar, enter the IP address that is assigned to the cable modem.
The cable modem web interface displays a login prompt.
6
Leave
User Name
blank.
7
In
Password,
type
ADMIN
.
8
Click
Log In
. The
Connection Status
page appears, indicating that you have
successfully logged on to the cable modem web interface.
.
Viewing the Software Status
The
Software Status
page displays information about the current software version
installed on the cable modem and the CM system status.
DRAFT
