42
Ruckus ICX 7650 Switch Hardware Installation Guide
Part Number: 53-1005301-01
Monitoring the Device
Ruckus ICX 7650 port-side LEDs
DRAFT: BROCADE CONFIDENTIAL
2x40 GbE module LEDs:
•
Four 40 GbE QSFP+ port bicolor status LEDs (green for 1x40 GbE and amber for 4x10 GbE) which indicate 1x40 GbE or
4x10 GbE mode of operation.
1x100 GbE module LEDs:
•
Four 100 GbE QSFP28 port bicolor status LEDs (green for 1x100 GbE and amber for 1x40 GbE) which indicate 1x100 GbE
or 1x40 GbE mode of operation.
shows the LEDs on the Ruckus ICX 7650-48ZP front panel. The up-arrow port status LEDs for the 1 GbE and
2.5/5/10 GbE ports correspond to the upper, odd-numbered ports; the down-arrow port status LEDs correspond to the lower,
even-numbered ports.
FIGURE 28
Ruckus ICX 7650-48ZP front-panel LEDs
NOTE
PoE/PoE+ power is available to ports 1-24. High PoE/PoH is limited to ports 25-48.
The Ruckus ICX 7650-48P has the following LEDs on the front panel:
•
Two management port status LEDs (green) for speed and link/activity
•
Two power supply unit (PSU) bicolor status LEDs (green and amber) labeled PSU1 and PSU2
•
One SYS (system) bicolor status LED (green and amber)
•
One DIAG (diagnostic) bicolor status LED (green and amber)
•
One MSTR (stacking configuration) bicolor status LED (green and amber)
•
One CLD (cloud management) bicolor status LED (green and amber)
•
One UPDATE (software update) bicolor status LED (green and amber)
1
Mode status LEDs: STAT, SPD, ID, USB, PoE
2
SYS (system status) LED
3
MSTR (stacking configuration) status LED
4
UPDATE (software update) LED
5
DIAG (diagnostic) status LED
6
CLD (cloud management) LED
7
PSU1 and PSU2 status LEDs
8
Ports 1-24 speed and link LEDs
9
Ports 1-24 speed and activity LEDs
10 Ports 25-48 speed and link/activity LEDs
11 4x10 GbE module speed and link/activity LEDs
12 Expansion module power LED
13 Management port link/activity LED
14 Management port speed LED
