sTeP 1 .
Find a suitable container
that you can soak your filter in. It is
a good idea if you obtain one solely
for this purpose. Container size about
33cm in diameter and 23cm deep
is ideal.
sTeP 2 .
In about 4 Liters of hot
water dissolve 250grams (1 cup) of
commercial dishwashing powder.
In australia we recommend
chlordex.
(Order Code DeT10: Available
from your local supplier)
sTeP 3 .
Rinse your filter under a
stream of water removing as much
of the pulp stuck to it as possible.
Place the filter directly into the
solution. It is important that you do
not scrub or brush the filter with any
abrasive cleaning aids. Place the filter
in the solution and allow it to soak
over night.
sTeP 4 .
In the morning thoroughly
wash the filter with regular detergent
and rinse.
sTeP 5 .
Follow these instructions
after each day of business to avoid
build up on your filter.
Note you may also clean the
blade, nut and collection pan in
this solution to remove build up
and staining.
Points to consider.
* Do not leave your filter in an area
where it can be damaged.
* Do not wash it along with your
pots, pans or other cooking
utensils. This can often damage
your filter.
* Do not scrub or brush the filter
with any abrasive cleaning aids
* If your filter is not cleaned and
maintained your juicer will not
function properly.
* If during the day you are stopping
to empty pulp from within the
filter frequently, your cleaning
procedures must be reviewed.
If you experience continuous
clogging contact an authorized
technician for service.
* Do not leave water or juice on
the top of the motor hub. Over
a period of time this liquid can
make its way into the bearings
damaging them.
CleANING INsTRuCTIONs :
Because fruits and vegetables contain natural substances that will build
up and stain your filter if left unclean, it is important that you follow this
set of cleaning instructions.
MaIntenance
:
* You should have your machine serviced at least once a year. Like most things if
you have your juicer serviced regularly, expensive repairs may be avoided.
* Your blade over time will wear dull. The blade can be re-sharpened for better yield.
* Your juicer should only be serviced by an authorized technician.
* Do not alter your juicer in any way or form. This will void any warranty.
* Bearings do not require lubrication.
