Rubine RCH-THORA-SS, User Manual

Page: 8 / 8

5 6
OPERATING INSTRUCTION
Limiting Screw
Pick the cooker hood up,the hanging hole
at the back of the box assembly is aligned
with the hanger on the installing braket,
and the limiting screw in the accessory
bag is fixed on the hole of the installing
bracket to prevent the accidental fall of
the hood.
Pull the inner duct cover to a suitable
height and secure the inner duct cover
from the side to the installation bracket
with the cross screwdriver.
If you need connect the common flue,
please do not put the exhaust pipe too
deeply,so as to not affect the effect.
If you connect the exhaust pipe to
outdoor,please push it out of the wall at
least 30mm, the air outlet should be
slightly adown,to avoid rain water
intrustion.
≥
30mm
Installation confirmation: after installation, check the hood whether it is
solid,turn the power on and test it, examin the function whether it is normal
and whether there is abnormal vibration of the body,after confirmation,can
be used.
Hook
Inner duct
cover
Outer duct
cover
M4 Screw
Power key:
①
When it is Power-Up state, touch this key into standby mode and the
indicator lamp flashes; touch this key again to exit standby mode;At the
motor working state, touch this key and the indicator lamp flashes, then
the machine continue to operate 3 minutes. After the delay, power will be
cut off automatically; at the delay state, touch this key and the power will
be cut off.
②
When it is power-up state,touch this key into clock-setting mode,touch
again into minute-setting mode.at the time-setting state,touch the Hot oil
key and Boost key to adjust the time(clock can be selected circulation in
0-23,minute can be selected circulation in 0-59).touch circularly to exit.
Ion Balancer key:
Touch to turn on/off the Ion Balancer function.
H² Meltz key:
When it is power-up state,touch this key to turn on the H² Meltz function
(after the heating mode work 10minutes,the fan will work 1minute in high
speed),the cooker hood will turn off automatically. Touch the hot cleaning
key/power key to turn off the auto-clean function.
CHARCOAL FILTER INSTALLATION & REPLACEMENT
1. The charcoal filters should be replaced when
it is noticeably dirty or discolored, usually
after 6 to 12 months depending on the
conditions of use.
2. These filters are not washable and cannot be
restored. To ensure that this appliance
functions effectively, regular maintenance is
necessary as clogged filters restrict airflow
and may cause the motor to overheat.
3. Removing and inserting the charcoal filter:
Take the baffle filter apart, hold onto the air intakes and turn slightly. Once
the charcoal filter turns out of the screw, remove directly.
Charcoal Filter
Mounting Screw
Mounting Slot
V-shape pressure
control filter
ON/OFF
SPEED SETTINGS
LIGHT X-BOOST H² MELTZ
ION BALANCER