3
Safety instruct ion
2. SAF ETY INSTRUC TIONS
Instructions for the installer these are intended for the qualified technician who must install the
appliance, set it functioning and carry out an inspection test.
It is obligatory for the electrical system to be grounded according to the methods required by safety
rules.
The appliance without plug ,When linking up to mains by plug and socket, make sure that both are
compatible and connect by means of a power cable complying with applicable regulations.
The socket must be accessible after the appliance has been built in
. Never unplug by pulling on the cable
.
Always check that the controls are in the position 0 (OFF) when y ou f ini sh usi ng t he hob.
During use the appliance becomes very hot. Take care not to touch the surface of the hob
The appliance is intended for use by adults. Keep children at a safe distance and never allow them to
play with it.
The appliance becomes very hot during use suitable heat proof gloves should be worn for all
operations.
Before the appliance is put into operation. All the labels and protective films applied inside or outside must
be removed.
Immediately after installation carry out a brief inspection test of the appliance, following the instructions
below. Should the appliance not function, disconnect it from the power supply and call the nearest
technical assistance center.
Never attempt to repair the appliance, all repairs must be carried out by an authorized engineer or
at an authorized service centre.
Important.
Beware of children in the vicinity as the warning lights indicating residual heat are out of
sight to them. In fact, even after having been turned off, the cooking zone remains hot for a
certain period of time.
Make sure that children never touch the hob.
