Rubbermaid HYGEN Product Use Manual Download Page 5

TOOLS

HOW TO:

DUST MOP LARGE AREAS

TIPS

•  100% Microfiber Mops are best 

for dusting—having the most 

fiber ends to grab and hold dust 

electrostatically as well as having 

the best surface contact.

•  Follow all established safety  

procedures.

•  Wear all appropriate personal 

protective equipment (glasses, 

gloves, etc.).

24” – 60” Fringed Dust Mops

PREPARATION

Remove large debris from floor, clean up any wet spots or spills, and then affix the  
Quick Connect Handle to the 18” Quick Connect Frame, ensuring the latch clicks into 
place.

Attach a clean Dust Pad to the Quick Connect Frame by placing it on floor with  
white, logo-imprinted backing side of the pad facing upward.

 
Push the Quick Connect Frame onto the pad.

 
Beginning at the end of the hallway or the far corner of the room, dust mop the  
floor by pushing the mop along the floor along side of the wall.

 
Work your way across the room using overlapping mopping paths.

 
When the dust mop pad becomes loaded with dust, refresh it by vacuuming away  
the accumulated material, or by wiping it away with a damp sponge.

 
To remove a large dust mop pad from the Quick Connect Frame, grasp the pad by  
the fabric loop and peel away.

Deposit soiled mop pad into the laundry bag.

tIP:

 

Select a mop size that will complete the task in the smallest number of  

passes. If a hallway is 60” wide, a 36” mop will clean it in 2 passes, but a 24”  

mop will require 3 passes, taking more time to clean the space.

1

 

2

 

3

 

7

 

PROCEDURE

5

 

6

 

Pick up all large debris from floor.

Be certain any wet spots are dried before dust mopping with Microfiber.

Reason: Microfiber dust mops are so dense with fiber and so absorbent that they  
will “stick” to wet spots making the mop difficult to push. 

Select a mop size that will complete the job in a minimum number of passes.  
Example: If a hall is 60” wide, a 36” mop will complete the job in 2 passes.  
A 24” mop would require 3 passes. Therefore, the 36” mop is a more efficient  
and better choice.

a

 

B

 

c

 

4

 

8

 

24” – 60” Quick Connect Frame

48” - 72” Quick Connect Straight Extension • Q755 

48” - 72” Quick Connect Ergo Handle • Q760 

58” Quick Connect Handle • Q750

9

Summary of Contents for HYGEN
















Reviews: