STEP 1
Top
Bottom
Parts Required
• Left Vertical Panel (1)
• Right Vertical Panel (1)
• Hinge Plates (4)
• Euro Screws (8)
Rail mounting requires a minimum height of 39.25" for base cabinets. Center to center
measurement between rails is 30-3/16". Attach rail to wall per instructions provided
with rail. (Dimensions to top of rail)
Measurements
STEP 6
39.25"
30-3/16"
Floor
STEP 2
Parts Required
• Top Panel (1)
• Confirmat Screws (4)
• Screw Covers (4)
Top
Finished edge
down all sides
Top hook should be inserted in the 2nd open notch
from the gripper on the inside row of notches.
Upright Mounting Instructions
HAZARD:
Use two or more people to install cabinet.
Failure to do so can result in back or other injury.
HAZARD:
If upright is not attached to stud,
the load claim is null and void.
Use the upright brackets
for upright mounting only.
Parts Required
• Upright Brackets (2)
• Pan Head Screws (8)
• Euro Screws (4)
Bottom
Top
Finished edge
down all sides
Parts Required
• Foot (4)
• Foot Screws (12)
• Bottom Panel (1)
• Confirmat Screws (4)
STEP 3A
STEP 3B
Parts Required
• Bottom Panel (1)
• Confirmat Screws (4)
Bottom
Finished edge
down all sides
STEP 4
Top
STEP 5
Parts Required
• Backer Board (1)
• Nails (22)
Remove perforation
when upright
mounted only.
Bottom
Top
Finished edge
down all sides
Floor Mount Instructions
Choose Your Installation Method, Upright Mount or Floor Mount
Upright Mount Instructions
Sides of foot should
be square in corner.
Top
Bottom
Finished edge
down all sides
Insert confirmat screw
through foot.
STEP 11
Parts Required
• Handles (2)
• Handle Screws (4)
STEP 10
Bottom
Top
Parts Required
• Doors (2)
• Metal Plates (4)
• Metal Plate
Fasteners
with Screws (12)
STEP 9
Parts Required
• Hinges (4)
Center hinge
plate screw in
hinge slot.
Install hinges to
hinge plates.
Repeat for
other side.
STEP 12
Parts Required
• Hinge Plate Screws (8)
• Door Pads (4)
Assemble doors to the cabinet.
Shelf and Door Assembly Instructions
Finished
edge
Important:
STEP 7
Parts Required
• Shelf Support Pins (4)
STEP 8
Parts Required
• Adjustable Shelf (1)
Bottom
Place the
adjustable shelves
on the pins.
Place pins at
desired locations
for adjustable shelves.
Adhere door pads
to top and bottom
corners of doors.
One upright must be
attached to stud.
If two cabinets share an upright
it must be attached to stud.
