3.0
Wall Panel G Installation
Using a screwdriver, punch out the screw holes on the top
of
Front Left Side (G)
2 places.
a.
G
Screw Holes
G
A
Snap
Front Left Side (G)
into
Front Floor (A)
.
Hold
Front Left Side (G) upright
to prevent it from
falling (until
Left Back (D)
is installed).
c.
G
ALIGN
ALIGN
click
A
Drill a pilot hole (using 1/8" drill bit) in front lower corner at
location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
b.
G
5