background image

 

 

RTX745x GUIDE 1.0 

 

 

 

 

|

 

P a g e

 

Proprietary and Confidential 
 
 

1

 

About This Document 

This document describes the configuration, management, operation and maintenance of the RTX745x headset base 
which is part of the range of the DECT system. For customer specific modes, please refer to specific customer 
agreements. 

1.1

 

Audience 

This guide is intended for everyday users. Furthermore, network administrators, IT support and anyone who wishes to 
gain knowledge on the fundamental features of the RTX745x base, can also benefit from this material. 

1.2

 

When Should I Read This Guide 

Read this guide before you install the devices and before setting up the DECT connection.  
 
This manual will enable you to set up components in your network to communicate with each other and deploy a fully 
functionally system. 

 

1.3

 

What’s Inside This Guide 

We summarize the contents of this document in the table below: 
 

WHERE IS IT? 

CONTENT 

PURPOSE 

CHAPTER 2 

Package overview 

Presents the package content and handling  

CHAPTER 3 

About the device 

Provides information on the device specifications and 
hardware 

CHAPTER 4 

User interface  

Gives an overview of the available icons on the user interface 

CHAPTER 5 

Call activity on base 

Introduces the different type of call scenarios 

CHAPTER 6  

Features overview 

Introduces the supported features on the base 

CHAPTER 7 

Regulatory compliances 

Presents the adherence to the laws and regulations 

 

1.4

 

What’s Not in This guide 

The guide is not intended to be as a comprehensive reference to details and specific steps on how to configure other 
vendor specific components/devices. For such a reference to vendor specific devices, please contact the respective 
vendor for documentation. 

1.5

 

Abbreviations 

For this document, the following abbreviations hold: 
 
DECT: 

Digital Enhanced Cordless Telecommunications 

MWI:  

Message Waiting Indicator 

PCBA:  

PCB Assembled 

MFB:  

Multi-Function Button 

BT: 

Bluetooth 

1.6

 

References/Related Documentation 

Pc tool 
Headsets guide 
 

Summary of Contents for RTX745 Series






















Reviews: