4.2.
Register repeater(s) “Manually”
NOTE:
Do not power on the repeaters before they have been added on the base station
NOTE:
When adding first repeater the base station(s) will reboot, this is because encryption is being enabled, the
same goes if all repeaters is deleted, then the system will reboot to disable encryption.
Step 1:
To register repeater(s), navigate to the Repeater page.
Screen shot
Step 2:
Click” Add Repeater” and select “Manually” from the dropdown
Screen shot
Step 3:
Give the repeater a name and press “save”
Step 4:
select what base station the repeater needs to register to “DECT sync source” drop down
In this case there are three base stations in the multicell (RPN00, RPN04 and RPN08) and three repeaters can be
connected to each base station.
Select the base station the repeater needs to register to.
E.g. RPN04
