EN-25
Manual | TouchMonitor TMR7 | TMR7OEM
Delivered Presets
EN
NOTE -
Please note that the TouchMonitor will only allow to
import presets, if the hardware and licences of the unit matches with
the instruments and hardware setup of the preset. In case of a mis-
match an error message will be seen and the import will be refused.
Short descriptions of the instruments used in the presets as well
as some hints for a fast interpretation of the readings are presen-
ted on the internal help page of the focussed instrument (touch
Help
in right edge of the control bar) or clicking the
Function
Description/Instruments
options of the manual stored on the
USB fl ash drive.
Delivered Presets
The USB fl ash drive delivered with TouchMonitor TMR7 resp. TMR7-
OEM contains 16 predefi ned presets presenting a cross-section of
the applications and standards supported by the unit. Using these
presets, you can start working with the device right out of the box, but
you also can adapt them to your individual needs. For the OEM versi-
on all presets are also available for vertical use. Find screenshots and
the description of the most important features on the following pages.
Load presets from USB fl ash drive
1. Touch the screen, then
Load Preset
in the right part of the con-
trol bar (lower edge of the screen).
2. Touch
External
. The available presets are displayed.
3. Touch the preset you prefer. It will be loaded and will be available
for normal operation after some seconds.